ofWhite Architects

Fatjon Bardho · architect · ofWhite Architects · 2026

Damp and mould in an apartment: where they come from and how to fix them

The short answer: in most apartments mould comes from condensation, not from a leaking wall. Warm, humid air from cooking, showers and laundry dried indoors meets a cold wall and the water settles there. The fix starts with ventilation and even heating, then insulating the cold spots. Damp from rain, from the ground or from pipes needs a different repair.

Read the stain

Where and when it appears tells you the cause:

Where and whenLikely causeThe fix
Upper corners of outside walls, behind wardrobes, in winterCondensation at a thermal bridgeVentilation, heating, insulating the cold spot
Stains that grow after rainWater getting in from outsideRepair of the facade, joints, roof terrace or windows
A damp band 30–100 cm above the floor, with white saltsRising damp from the groundA damp-proof barrier and breathable plasters
A stain that grows whatever the weatherA leaking pipeFind and repair the pipe, then dry the wall

What you can do yourself

  1. Air briefly and fully5–10 minutes with the windows fully open, two or three times a day, does more than a window ajar all day.
  2. Extraction where the moisture startsThe bathroom and kitchen should send air outside, not recirculate it. Leave the fan running 15 minutes after a shower.
  3. Keep humidity at 40–60%A small hygrometer costs little and tells you when to air the room. Above 65% for days on end, mould starts.
  4. Away from outside wallsWardrobes and beds 5 cm off the outside wall, so air can move behind them.
  5. Laundry outside or in a dryerOne load of laundry dried indoors releases about two litres of water into the air.

What the architect fixes

  1. Thermal bridgesConcrete columns, beams and slab edges in the facade are the coldest points. External insulation covers them without losing space inside.
  2. The windowsDouble glazing with a thermally broken frame and an insulated installation joint. Without ventilation, new windows increase condensation.
  3. Mechanical ventilation with heat recoveryIt changes the air continuously while keeping most of the heat. The most lasting fix when many people live in few square metres.
  4. Walls against the groundWaterproofing outside, drainage around the foundations and plasters that let the wall dry.

Read next

Frequent questions

Why does mould only appear in winter?

Because the outside walls get cold and the warmer, more humid indoor air condenses on them. In summer the walls are warm and the condensation stops.

Does anti-mould paint solve it?

Not for good. It cleans and delays it, but if the ventilation and the cold spot stay, the mould returns.

Is a dehumidifier worth it?

Yes, as an immediate fix in rooms without ventilation or in basements. It does not replace ventilation and insulation.

When should you call a specialist?

When the stain grows despite airing, when there is damp after rain or low on the walls, or when the mould returns to the same place every year.

The architect's advice

Anti-mould paint hides the problem for one winter. Without removing the cause, the mould returns to the same spot.

General guidance. For health problems linked to mould, consult a doctor.

ofWhite Architects

Architecture and interior design studio in Tirana since 2010.

Interactive version on the site →Contact usWhatsApp