ofWhite Architects

Fatjon Bardho · architect · ofWhite Architects · 2026

How to calculate the lighting for every room: lumens, layers and types of fitting

The short answer: multiply the area of the room by the lux it needs (150 for the living room and bedroom, 200 for the bathroom, 300 for the kitchen) and you have the lumens. Divide by the lumens of one fitting and you have the number. Then add the task light and the accent light, because a ceiling full of spots is not a lighting design.

Five words to know

They are printed on every lamp box. Read them and you stop buying by eye:

  1. Lumen (lm)How much light a lamp gives out. This is the figure to compare when buying, not the watts.
  2. Lux (lx)How much light lands on a surface. 1 lux is 1 lumen on 1 m².
  3. Kelvin (K)The colour of the light: 2700 K is warm like the old bulb, 4000 K is a working white.
  4. CRIHow true colours look under that light, from 0 to 100. For a home, ask for 90 and above.
  5. Watt (W)How much power the lamp uses, not how bright it is. A 7 W LED gives about 600 lumens.

How many lumens your room needs

Lumens = lux × area. Choose the room and enter the square metres:

This is the general light only. For dark walls or a ceiling above 3 m add 20–30%. The plan shows an even layout in a room of 4:3 proportions.

The values are in lux, that is lumens per m². The task light is calculated only for the surface where the work happens, not for the whole room.

The three layers of light

A well-lit room has three kinds of light, each on its own switch. Turn them on one by one:

General light only: everything is visible, but the room is flat.

  1. General lightIt fills the room evenly: recessed spots, a ceiling light or pendants. This is the one calculated in lux per m².
  2. Task lightIt lands where the work happens: on the worktop, at the mirror, on the desk, by the reading chair. It needs three to five times the lux of the general light.
  3. Accent lightIt brings out a painting, a wall, a niche or the ceiling. It does not light the room, it gives it depth.

The colour of light: how many kelvin

The same room changes character with the colour of the light. Move the scale:

  1. No more than two colours in one roomFor example a general light at 2700 K and a task light at 3500 K. Three colours look like an accident.
  2. A gentle step from room to roomLiving room 2700 K, hallway 3000 K, kitchen 3500 K. Not from 2700 straight to 4000.
  3. CRI of 90 and above everywhereAt the bathroom mirror, in the dressing room and over the worktop ask for 95. Below 80, skin and food look grey.
  4. A dimmer in the main roomsLiving room, bedroom, dining room and kitchen. The same light serves for cooking and for having dinner.

The types of fitting and where each one belongs

Eight types cover almost every home:

How far apart the spots go

The spacing depends on the ceiling height, and the pool of light on the beam angle. Try both:

The height-divided-by-two rule is a starting point, not a law. The first row goes 60–90 cm from the wall; any closer and the light scallops the wall.

The seven most common mistakes

  1. Only spots in the ceilingThe room comes out evenly lit everywhere and looks flat. Remove a few spots and add a task light and an accent.
  2. Cold light where you restAbove 4000 K the living room looks like an office. For the living room and bedroom stay at 2700–3000 K.
  3. Colours mixed by accidentA 3000 K lamp next to a 4000 K one looks like a fault. Buy all the fittings for a room at the same kelvin.
  4. Low CRIThe cheapest lamps have a CRI of about 80. The difference shows on skin, wood and food.
  5. No dimmerThe light that is enough for cleaning is too much for watching a film. Without a dimmer you get only one of the two.
  6. A spot above your headOver the pillow, over the sofa or facing the television, a spot dazzles. Move it towards the wall.
  7. The worktop and the mirror with no task lightWith light only from the ceiling, your body shades the worktop and your face is shadowed at the mirror.

Frequent questions

How many lumens per m² do I need?

For the general light: 100–150 in the living room, bedroom and hallway, 150–200 in the bathroom, 200–300 in the kitchen, 300 in a study and 400–500 in a dressing room. The task light is counted separately.

How many spots does a 20 m² room need?

In a living room: 150 lux × 20 m² = 3,000 lumens, so 5 spots of 600 lumens. In a kitchen: 300 × 20 = 6,000 lumens, so 10 spots.

3000 K or 4000 K?

2700–3000 K where you rest, 3500–4000 K where you work: over the worktop, at the mirror, in the study. Above 4000 K is not recommended in a home.

How far apart do the spots go?

As a starting point: the ceiling height divided by two, and 60–90 cm from the wall. With a 2.7 m ceiling that is about 1.35 m.

The architect's advice

Lighting is decided together with the furniture, not after it. Before the ceiling is closed, mark on the plan where the sofa, the bed, the table and the mirror go: that is where the light points and the switches belong.

ofWhite Architects

Architecture and interior design studio in Tirana since 2010.

Interactive version on the site →Contact usWhatsApp